Overview of Media
Edit Media List
Tap on the Pencil to edit the Media List
The Images are categorised into:
- Spine and Pelvis
- Upper Limb
- Lower Limb
To add an image, tap on it and it will appear in the Media list.
You can add multiple images and videos.
You can delete by tapping on the red minus button and reorder by dragging with the = button.
Tap on the orange tick to confirm.
Once the images and video are added to the Media list they can be used in a scenario.
When the image is tapped, it is sent to Chart and Engage and comes up with the message Sent.
If you use the toggle 'Show on Monitor', the media will also be shown on the Monitor.
Media can be imported by tapping on the + button in edit mode
This will open up the Photos selector
Choose a media item to import.
Imported Media is shown in the Imported Media Tab
Edit the imported Media by tapping on the Pencil.
You can now
- Edit the name
- Change Classification to General, Ultrasound, Laryngoscopy, Bronchoscopy and Radiography
A Classification specific mask is applied to the image or video when the media is shared to the monitor or chart screen as shown below.
Included in the General, Ultrasound and Radiography masks are the patient details as entered in the Scenario Information.